AUTOMATIC FIRE EXTINGUISHER MICRO - VIPER

The automatic fire extinguisher MiCRO-VIPER works automatically without operator intervention, without the need for an external source, based on the principle of high temperature detection or directflame, independently of an electrical power supply by means of a special modified polyamide (PA) hose (with an outer diameter of approx. 18 mm), which is activated at temperatures above 90°C. When a fire is caused by fire or when the temperature in the protected area reaches a critical limit, the pressure tube at the point with the highestat the highest temperature, it degrades, overheats and forms an opening through which the entire contents of the extinguishing agent are released under pressure directly into the fire. The extinguishing agent HFC227ea (heptafluoropropane) is a liquefied gas which gases when it enters the atmosphere. The extinguishing effects are based on a cooling and anticatalytic effect. The extinguishing agent extracts heat from the combustible assembly and at the same time enters the chemical chain reaction of combustion and slows and stops this reaction. The extinguishing agent is neither toxic nor poisonous and has no carcinogenic or mutagenic effects.

ADVANTAGES OF THE MICRO-VIPER AUTOMATIC EXTINGUISHER:
- Simple principle
- Simple and flexible installation
- The system operates fully automatically without the need for an operator
- No side effects
- The extinguishing agent is completely harmless to humans at a given concentration
- Reliably and effectively extinguishes the fire from the outset
- Easy installation
- Clean extinguishing agent evaporates without residue
- The system does not require any subsequent adjustments or regular checks
- Unlike powder and fire extinguishers, it leaves no trace after activation and evaporation and does not damage electronic parts

USE OF THE AUTOMATIC EXTINGUISHING AGENT MICRO - VIPER:
- control cabinets, computers or server rooms