The product is designed for fire water supply equipment i.e. wall hydrants, hose reels with flattenable hose and other fire water supply according to specific requirements (fire pipes, etc.).

It is a spindle-closing mechanism inside the valve body, which is installed in the water supply equipment fire water supply equipment and, by turning the handle, is used to close or open the water supply pipe. The handle is rotated to one side for the valve closing position and to the other side for the valve opening position.

The valves are not designed for potable water systems, so they cannot be installed on these systems.

Installation must be carried out using suitable tools and in such a way as to avoid damage to the valve itself.

The nominal clearance is DN52 (C52).

Operating temperatures are +5°C to 45°C and the working medium is always water.

The maximum operating pressure is 1.6MPa.

*Illustrative picture may be used.