AUTOMATIC FIRE EXTINGUISHER PA2 ELECTRO

FUNCTION OF THE AUTOMATIC FIRE EXTINGUISHER PA2 ELECTRO:
This is a fully automatic, disposable, flood-type extinguisher containing environmentally friendly extinguishing agent. The device is made of a hollow gas-tight profile composed of thermally sensitive materials. The profile is filled with extinguishing agent and after connection to 240V voltage the extinguishing agent is gassed, thus ready to extinguish the fire directly. In the event of a fire, the flames damage the paste profile and the extinguishing agent is released in gaseous form into the space, where it removes the temperature of the flame due to fission and the flame is extinguished. What is unique about the PA2 Electro system is the extreme speed at which the space is flooded with the extinguishing agent in its gaseous state. This device is designed for enclosed and unventilated spaces. This effect is achieved by the patented design of the device causing the extinguishing agent to be activated before being released into the protected space, in the event of a fire the PA2 Electro will only start extinguishing if it is in direct contact with the flame. On the model equipped with +HEAT SENSOR or +SMOKE SENSOR, the sensor wires are additionally lead out for connection to the status signal or directly for control - tripping the main circuit breaker. The standard contact position is normally open (N/O).

USE OF AUTOMATIC FIRE EXTINGUISHER PA2 ELECTRO:
The system is designed for enclosed spaces with air volume up to 0,05 m3, 0,1m3, 0,15 m3 according to the model. For rooms where the operating temperature ranges from -10°C to 40°C.

VARIANTS OF AUTOMATIC FIRE EXTINGUISHER PA2 ELECTRO:
AUTOMATIC FIRE EXTINGUISHER PA2 ELECTRO - 20 cm - 0323/20
AUTOMATIC FIRE EXTINGUISHER PA2 ELECTRO - 30 cm - 0323/30
AUTOMATIC FIRE EXTINGUISHER PA2 ELECTRO - 40 cm - 0323/40