KIDDE 29HD FIRE AND SMOKE DETECTOR WITH ALARM
WHY BUY A DETECTOR?
The Kidde 29HD optical photoelectric fire and smoke detector is designed to continuously monitor the air for the presence of smoke and fire.

WHAT DOES THE DETECTOR DO?
Thanks to the photoelectric detection technology, the detector reacts faster to a fire, in the first phase when a large amount of visible smoke is produced without open flames, such as smoke from smouldering objects. In the event of a fire, an acoustic signal of 85 dB is automatically triggered, while the device also indicates the alarm visually by means of a red LED indication. The fire detector is equipped with a TEST button to check the correct functioning of the deviceand a HUSH function for temporary silencing of the fire detector in case of a false alarm. Pressing the button causes the alarm to be immediately deactivated for about 10 minutes, the sensitivity of the circuits to be reduced and the sounder to be switched off. Only use the HUSH button when you know the cause of the alarm activation (when cooking or frying). After approximately 10 minutes after the detector has been deactivated, it will completely automatically reset to the original fire hazard monitoring settings. If a high concentration of smoke remains in the room, you can press the HUSH button repeatedly until the room is properly ventilated. This model is equipped with Kidde's state-of-the-art photoelectric sensor. The detector has a built-in automatic control system that monitors performance among other components of the device such as the sensor, battery or internal circuitry. If a fault or low battery voltage is detected, the device will notify you both audibly and visually.

HOW IS THE DETECTOR POWERED?
Battery operation allows for quick and easy installation and ensures proper operation of the device regardless of voltage (for example, during a power outage). The detector can be placed in and near the kitchen, living room, dining room, bedroom, hallway, boiler room, basement, attic, and anywhere you use electrical equipment such as electric stoves, etc. The detector is guaranteed for 5 years.

WHERE TO INSTALL THE DETECTOR?
Thanks to its modern design, it can be installed in places with the potential for accidental activation of the "False Alarm" sensor, such as near the kitchen, etc. It is also equipped with a special lock to protect against accidental removal of the device by either children or third parties.

*Certification: CE 0786-CPD-20733