UNDERGROUND HYDRANT MILANO
Underground hydrant made of GJL 250 cast iron in accordance with UNI EN 1503-3; working pressure up to 16 bar. Inlet flange: PN 16, according to EN 1092-2
Automatic drainage allows the hydrant to be completely emptied; the drain rubber tip closes when the hydrant is in operation.

PRODUCT FEATURES
- Total height from inlet flange to service cap: 650 mm (except DN100; for this diameter the length is 750 mm)
- Test pressure: 25 Bar with open hydrant, 21 Bar with closed hydrant
- Square service cap; also available in pentagonal shape in accordance with UNI EN 14339 DN 80 and 100.
- Seals are in accordance with EN 681-1, according to the minimum requirement for vulcanised rubber.
- All parts in contact with water are suitable for use with potable water in accordance with legal directive No 102/78 and No 174 of 06.04.2004

AREAS OF APPLICATION
near buildings, public spaces, industrial complexes