SAFE 808COM CO, FLAMMABLE AND EXPLOSIVE GAS DETECTOR WITH ALARM - COMBINED

Combination detector, measuring device with voice warning designed to indicate carbon monoxide and unexploded gas leaks .all commonly occurring explosive gases in households (natural gas, methane, propane, butane) and residential areas without significant hazard. The device is suitable for the detection of gas from all domestic gas appliances, gasboilers and indicates leaks of combustible gas used for heating, cooking or warming.

What can the detector do?
It is equipped with two independent sensors that do not require further calibration, a TEST button to trigger function, which allows you to verify the operability of the internal circuits using an automatic efficiency monitoring system. The device has stable measurements, long life, compact size and is highly sensitive. It is controlled by a microprocessor and signals CO and gas leaks visually and audibly via an 85 dB buzzer. If a hazard is detected, the device triggers an acoustic buzzer signal accompanied by flashingand a voice alert "Please beware, carbon monoxide leak!" or "Attention, gas leak!". With this warning message, the detector display simultaneously shows the current measured value. The device is powered from 230V/AC mains with a 9V NiMH battery backup in case of mains power failure (battery not included).

Where to install the detector?
Carbon monoxide, combustible and explosive gas detectors are installed in rooms with potentialm potential CO or gas leaks such as bathrooms, gas boiler rooms, kitchens, rooms with vacuum cleaners, karma, instantaneous heaters, thermometers, etc. To properly position the detector, we must first identify the gas, whether we are detecting a light gas that rises up to the ceiling or a heavy gas that falls to the floor. Once identified, we can choose a suitable location for the device. Always install on the wall, depending on the type of gas detected, below the ceiling (approx. 15-30 cm) or above the floor (approx. 15-30 cm) and at least 1.2 m away from the fuel burning device to minimize falsefalse alarms that may occur during a short gas leak, for example when lighting a gas boiler or stove, at a distance of about 60 cm from the corners, i.e. the point where two walls converge.

*Certified to CE, EN 50194-1:2009 and EN50291-1:2010

Advantages:
- Unique dual combination of carbon monoxide and combustible gas detection devices
- Voice warning - human voice informs of detected danger
- Advanced catalytic combustion and electrochemical sensor technology in one device
- Display of current CO and gas concentration on LCD display
- Powered by AC 90V-240V mains
- Backup power supply with 9V NiMH rechargeable battery in case of power failure
- Intelligent detection control via microprocessor
- Information and warning LED indication
- Test function , verifying correct operation of the device
- Self-checking detection system with automatic sensor failure indication
- Backlit LCD display for displaying measured values
- Loud 85dB alarm signaling
- Wall mounted installation
- Low battery and sensor failure alarm
- Low cost of operation, small size and weight
- Easy installation and handling
- Modern and elegant design