Underground hydrant made of GJL 250 cast iron in accordance with UNI EN 1503-3; working pressure up to 16 bar. Inlet flange: PN 16, according to EN 1092-2

Automatic drainage allows the hydrant to be completely emptied; the drain rubber tip closes when the hydrant is in operation.

Total height from inlet flange to operating cap: 450 mm.

Test pressure: 25 Bar with open hydrant, 21 Bar with closed hydrant.

Square operating cap; also available in pentagonal shape in accordance with UNI EN 14339 DN 80 and 100.

Seals are in accordance with EN 681-1, according to the minimum requirement for vulcanised rubber.

NOTE: DN 50 and 65 do NOT comply with EN 14339 (not CE marked).

All parts in contact with water are suitable for use with potable water in accordance with legal directive No. 102/78 and No. 174 of 06.04.2004

Technical drawing: